ESSER by Honeywell IQ8Control M/Intelligent Addressable
ESSER by Honeywell IQ8Control M/Intelligent Addressable
Honeywell
ESSER by Honeywell IQ8Control C/Intelligent Addressable
The IQ8Control M as an efficient fire alarm control panel (FACP) for the property supervision of mid-sized to large objects, facilitates simultaneous detection, control, and alarm signaling both on the analog ring as well as on the spur.
The loop operation type of the panel (powered-loop or non-powered-loop) can be selected via a jumper located on the power supply card. Depending on which loop operation type has been selected, the corresponding analog module/ modules should be used.
Technical Data
Rated voltage
230 V AC
Rated frequency
50 ... 60 Hz
Rated current
0.35 A (standard); 0.7 A (powered loop)
Quiescent current
approx. 215 mA (basic configuration without operatingunit)approx. 230 mA (basic configuration with operatingunit)
Current consumption for ext. devices
2 A
Battery capacity
2 x 12 Ah, 2 x 24 Ah in the extension housing
Ambient temperature
-5 °C ... 45 °C
Storage temperature
-5 °C ... 50 °C
Air humidity
< 95 % (non-condensing)
Type of protection
IP30
Housing
ABS, 10 % glass fiber reinforced, V-0
Color
Gray, similar to Pantone 538
Weight
Approx 6.5 kg (without batteries)
Dimensions
W: 450 mm H: 320 mm D: 185 mm
Declaration of Performance
DoP-20827130701
Features
Max. five micromodules, with peripheral module Part No. 772477, up to five esserbus analog loop modules (the system supports up to 635 digital loop addresses in total)
Max. seven micromodules, with extension module Part No. 772476, up to seven esserbus analog loop modules (system supports up to 889 digital loop addresses in total)
Short circuit and open circuit tolerant loop operation
Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
Up to 127 esserbus devices (fire detectors and/ or manual call points)/detector zones per loop
Up to 32 esserbus transponders per loop/ operation of wireless components
Operation types TM and PM as per DIN VDE
0833 - 2 to avoid unwanted alarms being triggered
Fire brigade operating panel and transmission interface on the peripheral module
Three common relays, freely programmable, monitored, floating for up to 30 V DC/1A (on the peripheral module)
TTY or RS 485 or RS 232 interface
Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on the transmission rate
Connection to graphical supervisor WINMAG via serial essernet interface (SEI)
Operating panel with alphanumerical display
Large LCD display with 8 rows x 40 characters
Event memory for up to 10,000 events
All Systems 8000 micro modules are compatible
Printer interface for internal printer
Two batteries with a monitoring circuit
Monitored input for an external power supply unit Additional features for powered loop
Additional features for powered loop
Max. 6 analogs powered loops and expandable up to 127 loop devices (per loop) in mixed mode/loop powered and non-loop powered (the system supports up to 762 digital loop addresses in total)
esserbus PLus (Powered Loop) supplied, synchronously controlled, acoustic alarm signaling devices as per DIN EN 54 - 3 with alarm tone as per DIN 33404
Up to 48 powered loop base sounders (series 9200) per loop
Up to 32 powered loop IQ8Alarm per loop
Up to 48 IQ8Quad with alarm device per loop
![ESSER by Honeywell IQ8Control M/Intelligent Addressable]()
![ESSER by Honeywell IQ8Control M/Intelligent Addressable]()
![ESSER by Honeywell IQ8Control M/Intelligent Addressable]()
![ESSER by Honeywell IQ8Control M/Intelligent Addressable]()
![ESSER by Honeywell IQ8Control M/Intelligent Addressable]()
ESSER by Honeywell IQ8Control M/Intelligent Addressable
ESSER by Honeywell IQ8Control C/Intelligent Addressable
The IQ8Control M as an efficient fire alarm control panel (FACP) for the property supervision of mid-sized to large objects, facilitates simultaneous detection, control, and alarm signaling both on the analog ring as well as on the spur.
The loop operation type of the panel (powered-loop or non-powered-loop) can be selected via a jumper located on the power supply card. Depending on which loop operation type has been selected, the corresponding analog module/ modules should be used.
Technical Data
| Rated voltage | 230 V AC |
| Rated frequency | 50 ... 60 Hz |
| Rated current | 0.35 A (standard); 0.7 A (powered loop) |
| Quiescent current | approx. 215 mA (basic configuration without operating unit) approx. 230 mA (basic configuration with operating unit) |
| Current consumption for ext. devices | 2 A |
| Battery capacity | 2 x 12 Ah, 2 x 24 Ah in the extension housing |
| Ambient temperature | -5 °C ... 45 °C |
| Storage temperature | -5 °C ... 50 °C |
| Air humidity | < 95 % (non-condensing) |
| Type of protection | IP30 |
| Housing | ABS, 10 % glass fiber reinforced, V-0 |
| Color | Gray, similar to Pantone 538 |
| Weight | Approx 6.5 kg (without batteries) |
| Dimensions | W: 450 mm H: 320 mm D: 185 mm |
| Declaration of Performance | DoP-20827130701 |
Features
- Max. five micromodules, with peripheral module Part No. 772477, up to five esserbus analog loop modules (the system supports up to 635 digital loop addresses in total)
- Max. seven micromodules, with extension module Part No. 772476, up to seven esserbus analog loop modules (system supports up to 889 digital loop addresses in total)
- Short circuit and open circuit tolerant loop operation
- Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
- Up to 127 esserbus devices (fire detectors and/ or manual call points)/detector zones per loop
- Up to 32 esserbus transponders per loop/ operation of wireless components
- Operation types TM and PM as per DIN VDE
- 0833 - 2 to avoid unwanted alarms being triggered
- Fire brigade operating panel and transmission interface on the peripheral module
- Three common relays, freely programmable, monitored, floating for up to 30 V DC/1A (on the peripheral module)
- TTY or RS 485 or RS 232 interface
- Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on the transmission rate
- Connection to graphical supervisor WINMAG via serial essernet interface (SEI)
- Operating panel with alphanumerical display
- Large LCD display with 8 rows x 40 characters
- Event memory for up to 10,000 events
- All Systems 8000 micro modules are compatible
- Printer interface for internal printer
- Two batteries with a monitoring circuit
- Monitored input for an external power supply unit Additional features for powered loop
Additional features for powered loop
- Max. 6 analogs powered loops and expandable up to 127 loop devices (per loop) in mixed mode/loop powered and non-loop powered (the system supports up to 762 digital loop addresses in total)
- esserbus PLus (Powered Loop) supplied, synchronously controlled, acoustic alarm signaling devices as per DIN EN 54 - 3 with alarm tone as per DIN 33404
- Up to 48 powered loop base sounders (series 9200) per loop
- Up to 32 powered loop IQ8Alarm per loop
- Up to 48 IQ8Quad with alarm device per loop
ESSER by Honeywell IQ8Control C/Intelligent Addressable
The IQ8Control M as an efficient fire alarm control panel (FACP) for the property supervision of mid-sized to large objects, facilitates simultaneous detection, control, and alarm signaling both on the analog ring as well as on the spur.
The loop operation type of the panel (powered-loop or non-powered-loop) can be selected via a jumper located on the power supply card. Depending on which loop operation type has been selected, the corresponding analog module/ modules should be used.
Technical Data
| Rated voltage | 230 V AC |
| Rated frequency | 50 ... 60 Hz |
| Rated current | 0.35 A (standard); 0.7 A (powered loop) |
| Quiescent current | approx. 215 mA (basic configuration without operating unit) approx. 230 mA (basic configuration with operating unit) |
| Current consumption for ext. devices | 2 A |
| Battery capacity | 2 x 12 Ah, 2 x 24 Ah in the extension housing |
| Ambient temperature | -5 °C ... 45 °C |
| Storage temperature | -5 °C ... 50 °C |
| Air humidity | < 95 % (non-condensing) |
| Type of protection | IP30 |
| Housing | ABS, 10 % glass fiber reinforced, V-0 |
| Color | Gray, similar to Pantone 538 |
| Weight | Approx 6.5 kg (without batteries) |
| Dimensions | W: 450 mm H: 320 mm D: 185 mm |
| Declaration of Performance | DoP-20827130701 |
Features
- Max. five micromodules, with peripheral module Part No. 772477, up to five esserbus analog loop modules (the system supports up to 635 digital loop addresses in total)
- Max. seven micromodules, with extension module Part No. 772476, up to seven esserbus analog loop modules (system supports up to 889 digital loop addresses in total)
- Short circuit and open circuit tolerant loop operation
- Loop installation with I-Y(ST)Y 0.8 mm cable for a maximum length of 3.5 km
- Up to 127 esserbus devices (fire detectors and/ or manual call points)/detector zones per loop
- Up to 32 esserbus transponders per loop/ operation of wireless components
- Operation types TM and PM as per DIN VDE
- 0833 - 2 to avoid unwanted alarms being triggered
- Fire brigade operating panel and transmission interface on the peripheral module
- Three common relays, freely programmable, monitored, floating for up to 30 V DC/1A (on the peripheral module)
- TTY or RS 485 or RS 232 interface
- Integration in the short circuit and open circuit resistant essernet network with up to 31 fire detection panels depends on the transmission rate
- Connection to graphical supervisor WINMAG via serial essernet interface (SEI)
- Operating panel with alphanumerical display
- Large LCD display with 8 rows x 40 characters
- Event memory for up to 10,000 events
- All Systems 8000 micro modules are compatible
- Printer interface for internal printer
- Two batteries with a monitoring circuit
- Monitored input for an external power supply unit Additional features for powered loop
Additional features for powered loop
- Max. 6 analogs powered loops and expandable up to 127 loop devices (per loop) in mixed mode/loop powered and non-loop powered (the system supports up to 762 digital loop addresses in total)
- esserbus PLus (Powered Loop) supplied, synchronously controlled, acoustic alarm signaling devices as per DIN EN 54 - 3 with alarm tone as per DIN 33404
- Up to 48 powered loop base sounders (series 9200) per loop
- Up to 32 powered loop IQ8Alarm per loop
- Up to 48 IQ8Quad with alarm device per loop
