ESSER by Honeywell Compact/Single Loop Intelligent Addressable
ESSER by Honeywell Compact/Single Loop Intelligent Addressable
The Compact is a powerful, professional one loop circuit fire alarm control panel for monitoring small to medium-sized premises with increased demands on reliability - redundancy through the ring wiring. It allows simultaneous detection, control, and warning, both on the ring bus including stubs, as well as with the inputs and outputs built into the control panel, e.g. fire brigade interface, interface for fire control, outputs for conventional signal generators, and other relays for individual controls.
The Compact has a short circuit and open circuit tolerant Esserbus-PLus loop bus, on which up to 127 intelligent and individually addressable bus devices are supported.
Commissioning and configuration of customer-specific system data is with proven 8000 programming software tools.
The fire brigade peripherals (FBCP, FAT) or a remote control unit can be operated via the integrated RS485 interface.
Ideal for premises such as schools, kindergartens, nursing homes, doctors' offices, hardware stores, small hotels, shops, small businesses, and manufacturing or retail.
Technical Data
| Rated voltage | 230 V AC |
| Rated frequency | 50 ... 60 Hz |
| Rated current | 0.08 A |
| Battery capacity | max. 2 x 12 V/12 Ah |
| Ambient temperature | -5 °C ... 45 °C |
| Storage temperature | -5 °C ... 50 °C |
| Air humidity | < 95 % (non-condensing) |
| Type of protection | IP30 |
| Housing | ABS, 10 % glass fiber reinforced, V-0 |
| Color | Gray, similar to Pantone 538 |
| Weight | Approx. 5 kg (without batteries) |
| Dimensions | W: 450 mm H: 320 mm D: 185 mm |
| Declaration of Performance | DoP-21390140811 |
Features
- Single loop panel (the system supports up to 127 digital loop addresses in total)
- Integrated esserbus®-PLus
- Short circuit and open circuit tolerant loop operation with stub cable exits
- Operation of bus-supplied, synchronously controlled alarm generators (optical/acoustic/ voice) indifferent alarm areas via esserbus-Plus powered loop technology
- Length of the loop circuit (esserbus) up to 3.5km
- Up to 127 esserbus devices (fire detectors or manual call points)/group
- Up to 32 esserbus transponders
- Up to 30 IQ8Quad detectors with integrated signal generators
- Up to 20 IQ8Alarm signal generators
- Operation of ATEX approved detectors (intrinsically safe) for potentially explosive areas
- Optimized commissioning, maintenance, and operation
- Easy configuration and programming of the FACP functions via display
- 4 relays, programmable, not monitored, potential-free, max. 30 V DC/2 A or 60 V DC/1 A
- 2 outputs for connection to acoustic and optical signal generators according to EN 54-13 (each 24 V DC/max. 500 mA)
- 1 interface to a transmission unit (TU) for fire alarm (12 V DC/max. 200 mA)
- 1 interface to a transmission unit (TU) for fault reports (12 V DC/max. 200 mA)
- 1 standard interface solution for fire control type C acc. DIN EN 54-2
- RS485 for connection of fire brigade control panel and fire brigade graphic annunciator
- 1 output UBext 24 V/0.5 A, for the voltage supply of external devices, 72-hour emergency bypass (depending on configuration)
- Integrated detector groups individual display
- Function "delay the transmission" (according to DIN VDE 0833-2, to avoid false alarms, delay/ investigate)
- Function "two-message dependency" (according to DIN VDE 0833-2, to avoid false alarms), alternatively programmable as alarm caching, multi-group dependence, or multi-detector dependency
- Operating panel with alphanumerical display
- Large LCD display with 8 rows x 40 characters
- Alarm counter for up to 10,000 trips
- Event memory for up to 10,000 events
ESSER by Honeywell Compact/Single Loop Intelligent Addressable
The Compact is a powerful, professional one loop circuit fire alarm control panel for monitoring small to medium-sized premises with increased demands on reliability - redundancy through the ring wiring. It allows simultaneous detection, control, and warning, both on the ring bus including stubs, as well as with the inputs and outputs built into the control panel, e.g. fire brigade interface, interface for fire control, outputs for conventional signal generators, and other relays for individual controls.
The Compact has a short circuit and open circuit tolerant Esserbus-PLus loop bus, on which up to 127 intelligent and individually addressable bus devices are supported.
Commissioning and configuration of customer-specific system data is with proven 8000 programming software tools.
The fire brigade peripherals (FBCP, FAT) or a remote control unit can be operated via the integrated RS485 interface.
Ideal for premises such as schools, kindergartens, nursing homes, doctors' offices, hardware stores, small hotels, shops, small businesses, and manufacturing or retail.
Technical Data
| Rated voltage | 230 V AC |
| Rated frequency | 50 ... 60 Hz |
| Rated current | 0.08 A |
| Battery capacity | max. 2 x 12 V/12 Ah |
| Ambient temperature | -5 °C ... 45 °C |
| Storage temperature | -5 °C ... 50 °C |
| Air humidity | < 95 % (non-condensing) |
| Type of protection | IP30 |
| Housing | ABS, 10 % glass fiber reinforced, V-0 |
| Color | Gray, similar to Pantone 538 |
| Weight | Approx. 5 kg (without batteries) |
| Dimensions | W: 450 mm H: 320 mm D: 185 mm |
| Declaration of Performance | DoP-21390140811 |
Features
- Single loop panel (the system supports up to 127 digital loop addresses in total)
- Integrated esserbus®-PLus
- Short circuit and open circuit tolerant loop operation with stub cable exits
- Operation of bus-supplied, synchronously controlled alarm generators (optical/acoustic/ voice) indifferent alarm areas via esserbus-Plus powered loop technology
- Length of the loop circuit (esserbus) up to 3.5km
- Up to 127 esserbus devices (fire detectors or manual call points)/group
- Up to 32 esserbus transponders
- Up to 30 IQ8Quad detectors with integrated signal generators
- Up to 20 IQ8Alarm signal generators
- Operation of ATEX approved detectors (intrinsically safe) for potentially explosive areas
- Optimized commissioning, maintenance, and operation
- Easy configuration and programming of the FACP functions via display
- 4 relays, programmable, not monitored, potential-free, max. 30 V DC/2 A or 60 V DC/1 A
- 2 outputs for connection to acoustic and optical signal generators according to EN 54-13 (each 24 V DC/max. 500 mA)
- 1 interface to a transmission unit (TU) for fire alarm (12 V DC/max. 200 mA)
- 1 interface to a transmission unit (TU) for fault reports (12 V DC/max. 200 mA)
- 1 standard interface solution for fire control type C acc. DIN EN 54-2
- RS485 for connection of fire brigade control panel and fire brigade graphic annunciator
- 1 output UBext 24 V/0.5 A, for the voltage supply of external devices, 72-hour emergency bypass (depending on configuration)
- Integrated detector groups individual display
- Function "delay the transmission" (according to DIN VDE 0833-2, to avoid false alarms, delay/ investigate)
- Function "two-message dependency" (according to DIN VDE 0833-2, to avoid false alarms), alternatively programmable as alarm caching, multi-group dependence, or multi-detector dependency
- Operating panel with alphanumerical display
- Large LCD display with 8 rows x 40 characters
- Alarm counter for up to 10,000 trips
- Event memory for up to 10,000 events
PAYMENTS & SHIPPING
Payments
As of now, we accept payments through offline bank deposits or PayPal. Personal and bank cheques and money order payments require a period of waiting before your payment will arrive and can be processed before your order can be shipped.
For payments via bank deposits, use your order number as a reference when processing your payment. Please notify us via email at info@rockford.com.ph when you have made your deposit so we can start processing your order
ORDERS
After you've placed your order and checked out, we will automatically send you an email confirming your purchase. We will send you another email informing you that your order has already been shipped.
What are the shipping companies you use to ship out orders?
In-house delivery team, Grab, and Lalamove
SHIPPING FEES, TIME AND AREAS
When will my order be shipped?
Through third-party logistics, we are able to ship nationwide. It would typically take seven (7) to fifteen (15) business days for us to ship your order if you are outside Metro Manila. Otherwise, we usually send your order within three (3) to five (5) business days if you are in Metro Manila. The faster you make your transaction, the faster you receive your order.
You will be able to track your order through our platforms and receive relevant updates on its status via email. When your order has already been packed and shipped, it will be marked as "Shipped".
Rockford is not liable to any late delivery and that delivery times indicated are only based on guidelines. Uncontrollable events, such as natural disasters can greatly affect the expected delivery time. We ask for patience in times like this as we will do our best to deliver and update you.
The stated delivery times are only guidelines and Rockford Marketing Corporation is not liable for any failed deliveries per the said times. Aside from that, uncontrollable events, such as natural disasters, can affect your order's delivery time. During these times, please be patient, and we will do our best to update you on your purchase.
How much is the shipping fee for an item?
For Metro Manila orders:
Free shipping for orders worth Php 5,000 and above
For orders below Php 5k, a flat rate shipping of Php 150 will apply
Customs
We also want to let you know that we have partnered with foreign brands and some products may be shipped from outside the country. Please be advised that SRPs are subject to change without prior notice. This may be because of change or taxes and importation fee.
Order Cancellation
You can cancel your order if the item has not been dispatched from our office. Just have to contact us via email, info@rockford.com.ph or call us at 8245-3133 (loc. 120).
Warranties and Returns
All of our products cover a one-year warranty. If you receive a damaged or defective product, or it was damaged within a year of your purchase, you can bring it to our office at 722 Moriones St. cor Juan Luna, Tondo Manila. In order to return your product, you must provide the following:
- Actual product with packaging still intact
- Sales invoice of the said product
Note: Please send us an email at panasonic.service@rockford.com.ph and wait for our confirmation before coming to our office.
Lastly, if you received the wrong product/s, we encourage you to contact us immediately so we can handle the problem right away. Shipping costs are on us!
